flight planning How do pilots determine the takeoff distance of an

Cessna 182 Takeoff Distance. Cessna 182S Skylane GSKYL in flight after takeoff from Breighton How short is short for a 182 with Horton kit? I have been invited to a 1,400 feet grass runway, to me seems doable, I plan to go me and a friend and 40 gallons. The Turbo 182 has a top speed of 168 knots and cruises at 158 knots at 75% power and 20,000 feet and 145 knots (167 mph) at 75% power and 10,000 feet.

Cessna 182
Cessna 182 from momigogo.blogspot.com

The 172 is a great plane, but the 182 is the next tier up when it comes to speed, distance, reliability, and performance. I seldom use flaps for takeoff unless I'm playing around, I'm always on fairly long paved runways

Cessna 182

The modern day Cessna 182T (commonly referred to as the 'Skylane') ispowered by a 230 hp Lycoming Model IO-540-AB1A5 air cooled, fuel injected engine: Burn Rate: 9.8 Gallons per hour Fuel Capacity: 92 Gallons (88 gallon useable fuel) Maximum Cruise Speed: 145 ktas Maximum Range: 915nm Takeoff Distance: 1,514 ft Ground Roll: 795 ft Landing Distance: 1,350 ft Landing Ground Roll: 590 ft Service. Both the Skylane and Turbo Skylane now have a 3,100-pound maximum takeoff weight That gives the normally aspirated Skylane 150 pounds of extra takeoff weight

Cessna 182T Skylane Untitled Aviation Photo 1364669. My dad flew his 182P off a grass strip that was 1200, maybe 1300 feet long and never had an issue. CESSNA 182T PERFORMANCE CHARTS (NOTE: your assigned aircraft may or may not perform exactly as indicated on these charts; refer to your assigned aircraft's POH for specific details.)

VHJDW Cessna R182 Skylane RG II (MSN R18201070) of the Royal Aero Club. The Turbo 182 has a top speed of 168 knots and cruises at 158 knots at 75% power and 20,000 feet and 145 knots (167 mph) at 75% power and 10,000 feet. To achieve the performance specified in the performance section for take-off distance of the aircraft approved flight manual, the speed appropriate to the particular weight must be used.